Kenmore Black Side by Side Refrigerator with Crushed/Cubed Ice Dispenser and Water Dispenser 106.5111971 - Scratch and Dent (Minor)

Kenmore Black Side by Side Refrigerator with Crushed/Cubed Ice Dispenser and Water Dispenser

Cosmetic Condition - Scratch and Dent (Minor)

This Appliance has minor cosmetic blemishes, See Pictures for Details. The appliance has been thoroughly tested and works 100% to Manufacturer Specifications. Any cosmetic imperfections do not affect its functionality. If you look at the pictures, you will see there is a small dent on the bottom middle of the left side, a small dent on the bottom right of the right side, a small dent on the bottom left of the front side, and a small dent on the bottom right of the front side.

Model Number - 106.5111971

Adjusting the Controls

For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make
sure that both controls, the refrigerator and freezer, are still set
to the recommended “mid-setting”. This will be displayed in the
sequence of bars with three illuminated bars.

Freezer Control

Press FREEZER to view the current set point for the freezer. Press FREEZER again to adjust the set point. The setting will increase by 1 bar with each press of the button, returning to 1 bar after reaching 5. After 2 minutes of inactivity, any changes will be saved and the
display will return to the home screen.

Water and Ice Dispensers

Depending on your model, you may have one or more of the
following options: the ability to select either crushed or cubed ice,
a special light that turns on when you use the dispenser, or a lock
option to avoid unintentional dispensing.

Refrigerator Control

Press REFRIGERATOR to view the current set point for the
refrigerator. Press REFRIGERATOR again to adjust the set point. The setting
will increase by 1 bar with each press of the button, returning to
1 bar after reaching 5. After 2 minutes of inactivity, any changes will be saved and the
display will return to the home screen.

The Water Dispenser

IMPORTANT:
Dispense at least 1 qt (1 L) of water every week to maintain a
fresh supply. If the flow of water from the dispenser decreases, it could be
caused by low water pressure. With the water filter removed, dispense 1 cup (237 mL) of
water. If 1 cup of water is dispensed in 8 seconds or less, the water pressure to the refrigerator meets the minimum requirement. If it takes longer than 8 seconds to dispense 1 cup of water, the water pressure to the refrigerator is lower than recommended.

The Dispenser Light

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, press LIGHT. Press LIGHT again to turn the dispenser light off. The dispenser lights are LEDs that cannot be changed. 

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when the dispenser lever is pressed.  Your ice maker can produce both crushed and cubed ice. Before dispensing ice, select which type of ice you prefer by pressing the Ice Type button. The display screen indicates which type of ice is selected. For crushed ice, cubes are crushed before they are dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes. 

The Dispenser Lock

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the refrigerator,
to the ice maker, or to the dispenser light. It simply deactivates the
dispenser lever. Press and hold LOCK for 3 seconds to lock the dispenser. Press and hold LOCK button a second time to unlock the dispenser. The display screen indicates when the dispenser is locked.

Water Filter Status

The filter status light will help you know when to change your
water filter. Replace the water filter cartridge when the water filter status
display changes to turn on.
NOTE: If water flow to your water dispenser or ice maker
decreases noticeably, change the filter sooner. The filter should
be replaced at least every 6 months, depending on your water
quality and usage.

Resetting the Filter Status

After changing the filter, press and hold LIGHT and ICE TYPE for 3 seconds to reset the filter status light. The status light will turn off when the system is reset.